EasyManua.ls Logo

NRS Healthcare M15691 User Manual

NRS Healthcare M15691
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Figure 2 – Assembling the cross bar
Figure 1 – In Use
User Instrucons
Over Bed/Chair Table
General Safety Warning
Please ensure these instructions are fully read and
implemented. Failure to do so may result in injury.
Retain these instructions in a safe place for future
reference.
1.0 Intended Use
Designed for use when sitting in either a chair or
bed these tables provide an adjustable height flat
surface for reading, writing, eating etc. The table
top can be tilted for increased comfort during use.
2.0 Safety Precautions
Do not overload the table top, 5kg Max Load.
Check handwheels are secure at regular intervals.
Do not attempt to use the table as a walking aid.
Do not attempt to sit or stand on the table.
3.0 Unpacking
Remove packaging and check all parts carefully
before assembling the product. Do not assemble if
any parts are missing or damaged.
Contents:
Table Leg (M15691 only with castors) X 2
Cross Bar (with castors) X 1
Table Top X 1
Telescopic Tube X 2
Hand Wheel – Long X 2
Hand Wheel – Short X2
4.0 Assembly
4.1 Frame Assembly:
Position the cross brace over the two side frames
as shown in figue 2.
Secure by inserting and tightening the two long
hand wheels.
M15691
Wheeled
M01278
Figure 3 – Assembling the Table Top
Question and Answer IconNeed help?

Do you have a question about the NRS Healthcare M15691 and is the answer not in the manual?

NRS Healthcare M15691 Specifications

General IconGeneral
CategoryMedical Equipment
NameNRS Healthcare M15691
Product CodeM15691
ManufacturerNRS Healthcare
TypeWalking Aids

Summary

General Safety Warning

Intended Use

Safety Precautions

Unpacking and Contents Check

Assembly

Frame Assembly

Position the cross brace over side frames and secure with long handwheels.

Table Top Assembly

Slide telescopic tubes through brackets and ensure they click into place on the table top.

Connect Table Top to Base

Insert telescopic tubes into side frames and secure the table top with short hand wheels.

Using the Table

Adjusting Height

Loosen handwheels, adjust height, and tighten handwheels to secure the table top.

Adjusting Angle

Loosen handwheel, adjust table top tilt angle, and secure by tightening the handwheel.

Operating Brakes

Push brake lever down to apply brakes; lift lever up to release castors.

Cleaning Instructions

Maintenance and Checks

Product Disposal

Product Guarantee

Related product manuals