NRS L97792 User Manual

User Instructions
Intended Use
The Economy Shower Chair is intended to be used
in a shower to provide a stable, seated support,
where a user is unable to stand for long periods (i.e.
during showering).It may be used with or without
the back rest.
Specification
Seat height Adjustable from 35 - 53cm
Seat Size: 49.5 x 29.5cm
Footprint 45 x 48.5cm
Max User Weight: 102 Kg (16st)
Contents Quantity
Bottom Legs 2
Chamfered bolts 4
Cupped Washer 5
Seat 1
Round head bolts 5
Back support Tube 2
Back 1
User Instructions 1
Assembly and Height Adjustment
Tools required: Philips Screwdriver
4. Put seat upside down on floor/flat surface
5. Align seat legs on the seat, so that the legs nest
together in line with the seat moulding.
6. In the centre of the seat, loosely install a round
head bolt through the cupped washer, top leg,
bottom leg and tighten to the seat as shown in
Fig 1.
7. Install the four chamfered bolts through the legs
into the seat moulding. Tighten all 5 bolts.
Maximum User Weight:
102Kg (16st)
Economy Shower Chair
L97792
Assembly and Height Adjustment - cont.
1. Align the back support tubes with the back
moulding.
2. Install the four round head bolts through the
cupped washers, back support tubes and into
the back moulding and tighten. (Fig 2).
3. Fit the back rest to the shower chair by
depressing the snap buttons and inserting the
back rest tubes into the location tubes in the
underside of the seat until it snaps into the
appropriate adjustment hole (Fig 3). Note: Two
back rest positions are possible; choose the
one which is most comfortable. Ensure the
same snap button is used so that the back rest
is not angled to the seat.
General Safety Warning
Please ensure these instructions are fully
read and understood before installation/
use. Retain these instructions in a safe
place for future reference.
Fig 1 - Assembly diagram
Page 1 of 2

NRS L97792 Specifications

General

Category	Wheelchair
Seat Depth	40cm (16")
Armrests	Fixed
Footrests	Swing-away
Model	NRS L97792

Summary

General Safety Warning

Read and Understand Instructions

Ensure instructions are fully read and understood before installation/use. Retain them for future reference.

Intended Use

Product Purpose

The chair provides stable, seated support in a shower for users unable to stand for long periods.

Assembly and Height Adjustment

Attaching Legs to Seat

Align seat legs, nest them, and loosely install round head bolt through cupped washer and legs into the seat.

Securing Seat Legs

Install four chamfered bolts through the legs into the seat moulding and tighten all five bolts.

Attaching Back Support Tubes

Align back support tubes with the back moulding and install four round head bolts through cupped washers.

Fitting the Back Rest

Depress snap buttons and insert back rest tubes into seat location tubes until they snap into adjustment holes.

Adjusting Seat Height

Depress snap buttons and slide leg extensions up/down frame tubes until they snap into the appropriate adjustment hole.

Ensuring Even Height

Secure all four leg extensions to the same adjustment hole for consistent and even height.

Using the Shower Chair

Shower Chair Placement

Place the chair in the shower, ensuring all legs are level and in contact with the floor. Sit centrally.

Safety Precautions

Weight and Condition Checks

Do not exceed user weight limit. Inspect regularly for wear, especially rubber feet. Do not use if damaged.

Cleaning Instructions

Regular Cleaning Method

Clean regularly by wiping down with a mild detergent/disinfectant solution.