EasyManua.ls Logo

NSA SF-1616-MPC User Manual

NSA SF-1616-MPC
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Cleaning & Care
Unplug the appliance before cleaning.
Do not use any water or chemical-based solutions for cleaning metal surfaces.
Slightly moisten a cloth and then wipe off the surfaces of the fan.
In order to remove the dust from the protective fan grille use a vacuum cleaner or
reverse the assembly instructions ~ undo safety screw, open securing clips on grille
edge and wipe fan blades with a damp cloth.
Ensure fan is completely dry and the fan grille securely refitted before storage or
reconnecting to electrical supply.
Never immerse the fan or fan motor in water or other liquid.
If the fan is not used for long periods, protect with a suitable cover after cleaning,
then store in a dry place.
This appliance complies with both the low voltage and electromagnetic compatibility
directives. Its construction complies with current safety standards. We reserve the right to
make technical changes without prior notice.
Disposal
The packaging of your new fan has a recycle mark on it. Please
dispose of it as recycled paper or by using the “Dual System”.
The symbol on the product or on its packaging indicates that this product may
not be treated as general household waste. Instead it should be handed over to the
applicable collection point for the recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product. For more detailed information
about the recycling of this product, please contact your local council office, your
household waste disposal service, the store where you purchased the product or visit
www.recycle-more.co.uk.
UK guarantee
For 12 months warranty in respect of defects found to be due to faulty workmanship or
material. Proof of purchase is required for validity of the guarantee. This guarantee is no
longer valid if the damage has been caused by fall, alteration or repair by any
unauthorised persons. This guarantee in no way affects your statutory rights.
Technical Data
Model No: SF-1616-MPC
Power: 60W
Voltage: 220-240V ~ 50Hz
Ref: IM/SF1616/1505/GU86AA
Product Dims: 450 x 410 x 1250 mm (L*W*H)
adjustable height 900 to 1250mm
NW: 5.6kg
GW: 6.4kg
Class II Product
16” / 40 cm
Model SF-1616-MPC
Instruction manual
3 speeds
4 metal blades
Rotary controls
Oscillation
Tilt
Carry handle
Height adjustable to 1.25m
Round base
Please keep safe for future reference
Please Recycle
4
© 2019 Newton Stovold Assocs Ltd
GU8 6AA / www.nsauk.com
Question and Answer IconNeed help?

Do you have a question about the NSA SF-1616-MPC and is the answer not in the manual?

NSA SF-1616-MPC Specifications

General IconGeneral
BrandNSA
ModelSF-1616-MPC
CategoryFan
LanguageEnglish

Summary

Cleaning and Care

General Cleaning Precautions

Unplug before cleaning. Avoid water/chemicals on metal surfaces and never immerse the fan.

Detailed Cleaning Procedures

Wipe surfaces with a slightly damp cloth. Clean grille/blades via vacuum or manual disassembly.

Storage Recommendations

Protect with a cover and store in a dry place if not used for extended periods.

Product Disposal

Packaging and Appliance Disposal

Instructions for recycling product packaging and the electrical appliance itself.

UK Guarantee Information

Technical Specifications

Pedestal Fan Safety Warnings

General Usage Safety

Do not operate with damaged parts, keep away from children/pets, avoid flammable liquids.

Electrical Safety

Keep power cord away from heat, avoid tripping hazards, and disconnect safely.

Environmental and Location Safety

Not for outdoor use, avoid wet/damp locations, and place on dry, level surfaces.

Assembly Instructions

Base and Pillar Assembly

Connect main pillar to base and secure with pillar nut and washer.

Motor Housing and Pillar Attachment

Insert motor housing into the upper main pillar and fasten with screw.

Grille and Blade Installation

Attach rear grille, fan blade, and secure with nuts.

Front Grille Securing

Open clips, loosen grille screw, position front grille, and tighten screw.

Fan Operation Guide

Fan Placement and Power

Position fan on a dry, level surface and plug into an electrical socket.

Speed Control

Turn the rotary speed control switch to select desired speed (1, 2, or 3).

Oscillation and Tilt Adjustment

Push down knob for oscillation; tilt head upwards/downwards (when off).