NSC Sicherheitstechnik Solution F2

Need help?

Do you have a question about the NSC Sicherheitstechnik Solution F2 and is the answer not in the manual?

Summary

Description of Control Panel

LED Indications

Explains the meaning of various LED indicators on the control panel.

Push Button Functions

End User Menu Navigation and Functions

Device and Output Control

Functions to switch zones, detectors, OC-outputs, relays, sounders, and TD.

System Status and Diagnostics

Detector Data and Analysis

Viewing and analyzing detector status, configuration, and specific data examples.

Installer Menu Functions

Installer Access and Main Menu

Test and Control Functions

Performing detector tests, manual controls, simulation, and revision.

System Configuration and Settings

Adjusting date/time, system settings, maintenance, and scanning devices.

Data Management and Interface Setup

Parameter and Option Settings

Firmware Update

Firmware Update Preparation

Required items and steps before performing a firmware update.

Executing the Flash Update

Step-by-step guide for flashing new firmware onto the FCP.

Troubleshooting Firmware Updates

Mounting Instruction

Fire Control System Configuration

Zone and Detector Configuration

Setting up zones, detectors, cross detection, and alarm parameters.

Timer Programs and Delay Settings

Power Output and Device Control

Functional Tests

Normal Operation and Fire Condition Tests

Verifying normal operation, fire condition, and alarm device functionality.

Fault and Disabled Condition Tests

Technical Specifications