EasyManua.ls Logo

NSi INDUSTRIES TORK TU40 - User Manual

NSi INDUSTRIES TORK TU40
4 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
NSi฀Industries,฀LLC฀•฀USA฀•฀877.230.7874฀•฀www.nsiindustries.com

Other manuals for NSi INDUSTRIES TORK TU40

Question and Answer IconNeed help?

Do you have a question about the NSi INDUSTRIES TORK TU40 and is the answer not in the manual?

Summary

Wiring Diagrams

Typical SPST Wiring

Wiring diagram for single pole single throw load, same voltage as timer supply.

Typical DPST Wiring

Wiring diagram for double pole single throw load, same voltage as timer supply.

Typical Two Circuit SPST Wiring

Wiring diagram for two circuit single pole single throw loads, same voltage as timer supply.

Product Features and Specifications

Key Features

Overview of the time switch's main features and functionalities.

Output and Contact Ratings

Details on output type and electrical contact ratings for NO/NC contacts.

Operating Environment and Supply

Specifications for operating temperature, humidity, timer supply, and power consumption.

Installation and Wiring

Installation Guidelines

Instructions for mounting the enclosure and connecting wires according to codes.

Wiring Best Practices

Recommendations for wire type, gauge, stripping, torque, and grounding.

Setting and Operation

Setting ON;OFF Times

Procedure for programming the timer's ON/OFF schedule using tabs and the dial.

Manual Override Modes

Explanation of switch positions for permanent ON/OFF or automatic operation.

NSi INDUSTRIES TORK TU40 Specifications

General IconGeneral
BrandNSi INDUSTRIES
ModelTORK TU40
CategoryTimer
LanguageEnglish

Related product manuals