5
English
2. Name and Function of each part
3. Prior to Operating System
Back side
Front side
(
Control Unit
With Control Unit Holder
)
Water Tube Connector
DC Connector
Foot Control Connector
Handpiece Cord
Power Indicator
Power/Volume Knob
Control Unit Holder
Handpiece Cord Holder
Handpiece Cord Holder
Output Indicator
Water Volume Knob
3-1 Set the AC Adaptor
Insert each plug into appropriate connector.
Insert the Plug Head into the Adapter Body as
shown in the right figure.
Slide the Plug Head on to the Adaptor Body.
To release, push the Release Button shown on the
right figure and remove the Plug Head from the
Adaptor Body.
Plug Head
Adaptor Body
Release Button
This Holder can move back and forth.
To Next Page
Loading...
