6
3-2 Connecting
Insert each plug into appropriate connector.
(
Fig.1
)
Align the " " Mark on the Foot Control Connector and Foot Control Plug and connect those firmly into
Foot Control Connector.
Connect Water Tube
(Non-Filter Side,
refer to Fig. 23 for detail
)
firmly into Water Tube Connector.
Connect AC Adaptor into DC Connector.
3-3 Disconnecting
3-3-1 DC Plug and Foot Control Plug
Simply pull out plugs from the Control Unit.
3-3-2 Water Tube
(
Fig.2
)
Depress the white ring to remove the water
tube.
Fig.2
CAUTION
•
Insert each plug and tube firmly into the connector. If connection is incomplete, it may cause
a malfunction.
•
Ensure Power is OFF on the Control Unit during the AC Adaptor Connection.
•
Do not connect the cord in wall outlet before connecting DC Connector.
•
Do not pull the AC Adaptor forcibly.
•
Do not disconnect the AC Adaptor while pressing on the Foot Control.
• Turn OFF the power to connect or disconnect the cords and plugs.
CAUTION
•
Shut off the main valve of the water injection, and then remove the tube.
•
It requires the water removal before the water tube disconnection.
White Ring
Fig.1
PULL
Water Tube
PUSH
Mark
Foot Control Plug
To Next Page
Loading...
