NSR Marine NGR-3000 - User Manual

USER MANUAL
GNSS equipment
NGR-1000/NGR-3000
NGR-1000/NGR-3000 UM.E 20190331-04

Summary

Safety Instructions

Operator Safety Guidelines

Safe operation of the GNSS equipment, including heat and direct sunshine avoidance.

Installer Safety Guidelines

Safe installation, including earthing cord connection and compass safe distance.

Product Features and Contents

Key GNSS Equipment Features

Key features of the NGR-1000/NGR-3000 GNSS equipment, including compatibility and accuracy.

Operating the GNSS Equipment

Control Interface Overview

Power and Display Adjustments

Navigation Planning and Execution

Waypoint Management

Procedures for registering, inserting, editing, and deleting waypoints.

Route Planning and Navigation

Steps for editing, creating, navigating, and deleting routes, including stopping navigation.

Alarms and Alert Configuration

Cross Track Error (XTE) Alarm

Warns when the ship is off its intended route via an internal buzzer.

Speed Alarm Settings

Activates when ship's speed is higher or lower than the set value.

Arrival and Anchor Watch Alarms

System Settings and Configuration

GNSS System Settings

Configuration options for GNSS mode, datum, RAIM, beacon/SBAS, and smoothing.

System Operational Settings

Alert Notification Settings

Maintenance and Diagnostics

Installation Guide

Main Unit Mounting

Guidelines for mounting the main unit on table-top, overhead, or panel.

Antenna Unit Mounting

Recommendations for selecting a mounting location for the GNSS antenna.

Wiring, Cabling, and Grounding

Initial System Setup

Appendix IV: Installation Drawings

Declaration of Conformity

NSR Marine NGR-3000 Specifications