What to do if NSR Marine Radio power cannot be turned on?
If the NSR Marine Radio does not turn on, first ensure the mains switchboard is on. If it still doesn't power up, check the supply voltage, as it might be too high.
Why is there no sound from the main speaker of my NSR Marine Radio?
If your NSR Marine Radio is on but there's no sound from the main speaker, it might be turned off. Press the VOLUME knob to turn on the main speaker.
How to fix a dark display on NSR Marine Radio?
If the display on your NSR Marine Radio is dark, the display brightness might be too low. Press the DIM button to adjust the display brightness.
What to do if there is no sound from the main speaker on my NSR Marine Radio?
If your NSR Marine Radio powers on but you're not hearing any sound from the main speaker, the most likely cause is that the main speaker is turned off. To resolve this, simply press the VOLUME knob to turn the main speaker on.
Why is the display dark on my NSR Marine Radio?
If your NSR Marine Radio display is dark, it's likely that the display brightness is set too low. You can easily fix this by pressing the DIM button to adjust the display brightness to a more visible level.
How to fix a NSR Marine Radio when the power cannot be turned on?
If your NSR Marine Radio won't turn on, there are a couple of potential reasons: * The mains switchboard might be off. Turn on the mains switchboard. * The (DC) voltage might be too high. Check the supply voltage.
Details copyright and usage restrictions for the manual.
States NSR's disclaimer regarding accuracy and liability.
Warns against unauthorized software installation or modification.
Advises reading the manual before use.
Introduces the NVR-3000 and its compliance with standards.
Lists key features of the NVR-3000.
Details the standard and optional components of the system.
Explains the function of each button on the NVR-3000 panel.
Describes the procedure for turning the device on and off.
Details the elements and indications on the main operating screen.
Explains channel scanning modes like Dual Watch.
Explains how to adjust the screen brightness.
Details how to control the main speaker volume and mute function.
Explains how to configure automatic call acknowledgements.
Covers various system configuration options.
How to turn SQL (Squelch) on/off.
How to set the squelch threshold.
Covers display configuration options.
Describes how to set system date and time manually or via GNSS.
How to set position when GNSS input is unavailable.
How to set time-out parameters for operations.
How to set baud rates for I/O ports.
How to build and manage a list of frequently used stations.
How to view and edit details of an address in the list.
Describes the process of adding a new address to the list.
How to remove an address from the list.
How to initiate a DSC call to a selected address.
How to perform system diagnostics and check status.
How to check the software program version.
How to test the LCD display and brightness.
How to test the functionality of keys, knob, and touch screen.
How to test the audio outputs and buzzers.
Manages user-specific settings and data.
Describes managing private channels for communication.
How to view and manage system alerts and their status.
How to perform user-specific tests on the device.
How to view the log of DSC messages.
How to select the appropriate channel region for operation.
How to set and change communication channels.
How to set transmit power and operate the handset.
How to manage squelch and SQL level for receiving signals.
Overview of DSC and its role in GMDSS.
How to manage audio and visual alarms for DSC calls.
Details the display for received DSC calls.
Details the display for transmitted DSC calls.
How to send and manage distress calls.
Step-by-step guide to sending a distress call.
How to send a distress call with custom information.
Procedure for receiving and responding to distress calls.
How to relay a distress call to a coast station.
How to relay a distress call to all ships.
How to cancel a distress call before or during acknowledgement.
Procedures for sending and receiving non-distress DSC messages.
How to make and receive individual DSC calls.
Step-by-step guide to sending an individual DSC call.
Handling of individual acknowledge calls.
Handling calls requesting a new communication channel.
Handling of calls that cannot be acknowledged.
Automatic sending of unable acknowledgements.
Manual sending of acknowledgements.
How to send an unable acknowledge call.
How to send an acknowledge call and propose a channel change.
How to make and receive group DSC calls.
Step-by-step guide to sending a group DSC call.
Procedure for receiving a group DSC call.
How to send urgency or safety calls to all ships.
Step-by-step guide to sending an all ships call.
Procedure for receiving an all ships call.
How to request or send ship position information.
How to request position data from another ship.
How to respond to a position request call.
How to send and receive test DSC calls.
Step-by-step guide to sending a test DSC call.
Procedure for receiving a test DSC call.
How to send and receive polling calls.
How to automatically reply to polling requests.
How to manually reply to polling requests.
Guidance on selecting a location and installing the VHF antenna.
Instructions for mounting the transceiver unit.
Details on connecting power, GNSS, printer, and other devices.
How to connect an optional printer.
Instructions for connecting to an (S)VDR.
Instructions for connecting to INS/BAM.
How to set the vessel's MMSI and ATIS ID.
General maintenance checks for the unit.
Common problems and their solutions.
Explains error messages and remedies.
General| Operating Temperature | -10°C to +55°C |
|---|---|
| Video Output | HDMI, VGA |
| Network Interface | 1 x RJ45 10/100/1000 Mbps |
| USB Interface | USB 2.0 |
| Power Supply | 12V DC |
To Next Page
