Nu-Calgon ViroBlaster

To Next Page

Indoor Air Quality Products

ViroBlaster

™

Nu-Calgon Product Bulletin 3-144

2611 Schuetz Rd. • St. Louis, MO 63043 • 800-554-5499 • www.nucalgon.com

Calgon is a licensed trade name • (1120) 3-144

• Quickly and easily sanitize your space with

the use of EPA sanitizers and disinfectants

• High atomization density spray and strong

electrostatic capabilities for coverage

• Adjustable spray nozzle emits formula at a

range from 70-150ml per minute

• Rechargeable lithium ion battery provides

30 minutes of run time

• Static coverage of over 16 feet with a spray

distance of over 9 feet

• Heavy duty translucent bottle with ½ gallon

capacity

• Each ViroBlaster comes with a rechargeable

lithium ion battery and charger

Description

The ViroBlaster is a portable electrostatic mist sprayer

designed to quickly, easily, and effectively dispense a

variety of cleaners, sanitizers, and disinfectants. The

electrostatic method of the ViroBlaster helps the product

cling to surfaces much more efficiently than a standard

sprayer. The ViroBlaster uses a rechargeable lithium ion

battery to provide 30 minutes of use efficiently dispensing

product.

Applications

This product must be used in accordance to the following

directions by HVACR professionals only.

Use the ViroBlaster to properly clean and sanitize

classrooms, offices, living spaces, hotel rooms, medical

facilities, and more! The ViroBlaster can spray product at

a distance of over 9feet with a static coverage area of over

16 feet. The ViroBlaster has an adjustable atomizing nozzle

that can provide a range of spray from 70 to 150ml per

minute.

Packaging

ViroBlaster Portable Electrostatic Mist Sprayer 4780-0

Replacement Lithium Ion Battery 4780-1

Replacement Battery Charger 4780-2

Instructions

1. Take the product out of package and check if there are

any parts missing or damaged before using.

2. Check the battery gauge by holding the on/off switch

on the battery pack; if the battery level is less than 50%

(less than 2 LED lights on), please recharge it before

using.

3. Mount the battery pack onto the bottom of the sprayer.

4. Mix disinfectant or chemical liquids in proportion or use

ready-to-use formulas and fill into the 1.8L bottle. Then

screw the bottle onto the sprayer device.

5. Note: Do not fill and use corrosive liquid or ethyl alcohol

with this device.

6. Review the instructions from the solution that you will be

using through the ViroBlaster for proper and accurate

use.

7. Press the on/off switch on back of sprayer to start the

job. The nozzle can be rotated to adjust the spray from

0-150ml per minute.

Warnings and Maintenance

Your ViroBlaster should be stored in such a way to protect

it from freezing. Do not store this unit outdoors or in an

area where temperatures will fall below 0°C (32°F). This can

cause extensive damage to the unit and void the warranty.

After each time of use and before storage, the following

steps should be followed: After each time of use and before

long term storage, fill some clean water into the bottle to

run through the sprayer to clean the residual disinfectant or

chemicals inside the sprayer. Store in a cool, dry place away

from children. Wipe clean with a damp cloth as needed. Do

not immerse sprayer device in water. Remove the battery

pack from the sprayer and recharge it when needed.

FOR BATTERY:

Do not store the battery in elevated temperature for an

extended period of time. Do not put the battery with sharp

or fine metal wire or pins. These materials may touch both

Need help?

Do you have a question about the Nu-Calgon ViroBlaster and is the answer not in the manual?

Summary

Product Description and Applications

ViroBlaster Description

Details the ViroBlaster as a portable electrostatic mist sprayer for efficient cleaning and sanitizing.

ViroBlaster Applications

Outlines recommended usage areas like classrooms, offices, and medical facilities for HVACR professionals.

Getting Started and Operation

ViroBlaster Packaging and Contents

Lists the components included with the ViroBlaster, such as the sprayer, battery, and charger.

Initial Instructions

Steps for checking product, battery charge, assembly, mixing solutions, and initial operation.

Warnings and Maintenance

General Warnings and Storage

Advises on avoiding freezing temperatures, cleaning after use, and proper storage conditions.

Battery Care and Storage

Provides guidelines for safe battery storage, charging, and preventing damage or short circuits.

The Nu-Calgon ViroBlaster is a portable electrostatic mist sprayer designed for the efficient and effective dispensing of various cleaners, sanitizers, and disinfectants. Its primary function is to apply these solutions to surfaces, leveraging electrostatic technology to enhance adhesion compared to standard sprayers. This device is particularly suited for HVACR professionals and is intended for use in a variety of indoor environments such as classrooms, offices, living spaces, hotel rooms, and medical facilities.

Function Description:

The ViroBlaster operates by atomizing liquid solutions into a fine mist, which is then electrostatically charged. This charge causes the mist particles to be attracted to surfaces, ensuring a more uniform and comprehensive coverage, even on complex or hard-to-reach areas. The electrostatic method allows the product to cling to surfaces more efficiently, maximizing the effectiveness of the dispensed solution. It is designed for quick and easy sanitization of spaces, utilizing EPA-approved sanitizers and disinfectants.

Important Technical Specifications:

Spray Output: The adjustable spray nozzle can emit formula at a range from 70-150ml per minute, allowing for precise control over application rates.
Battery: It is powered by a rechargeable lithium-ion battery, which provides approximately 30 minutes of continuous run time on a full charge.
Coverage: The ViroBlaster offers a static coverage area of over 16 feet and can spray product at a distance of over 9 feet, enabling efficient treatment of large areas.
Bottle Capacity: The device features a heavy-duty translucent bottle with a ½ gallon (1.8L) capacity, reducing the need for frequent refills during operation.
Components: Each ViroBlaster unit comes with a rechargeable lithium-ion battery and a charger.
Model Numbers:
- ViroBlaster Portable Electrostatic Mist Sprayer: 4780-0
- Replacement Lithium Ion Battery: 4780-1
- Replacement Battery Charger: 4780-2

Usage Features:

Portability: Its portable design allows for easy maneuverability and application in various settings.
Ease of Use: The device is designed for quick setup and operation. Users need to mount the battery pack, mix or use ready-to-use disinfectant/chemical liquids, fill the bottle, and then screw it onto the sprayer.
Adjustable Nozzle: The atomizing nozzle can be rotated to adjust the spray output from 0-150ml per minute, providing flexibility for different application needs.
Battery Indicator: The battery pack includes an on/off switch that also functions as a gauge, allowing users to check the battery level (indicated by LED lights) before use.
Solution Compatibility: It is compatible with a variety of disinfectant and chemical liquids. However, it is explicitly noted that corrosive liquids or ethyl alcohol should not be used with this device. Users must review the instructions for the specific solution being used to ensure proper and accurate application through the ViroBlaster.

Maintenance Features:

Storage: The ViroBlaster must be stored in a dry, cool, and well-ventilated place, protected from freezing temperatures. It should not be stored outdoors or in areas where temperatures fall below 0°C (32°F), as this can cause extensive damage and void the warranty.
Cleaning After Use: After each use and before long-term storage, the device should be cleaned by filling the bottle with clean water and running it through the sprayer. This flushes out any residual disinfectant or chemicals from inside the sprayer.
External Cleaning: The exterior of the device can be wiped clean with a damp cloth as needed. It is crucial not to immerse the sprayer device in water.
Battery Maintenance:
- The battery pack should be removed from the sprayer and recharged when needed.
- Batteries should not be stored in elevated temperatures for extended periods.
- Avoid contact between sharp or fine metal wires/pins and the battery terminals, as this can cause short circuits, leading to burnout or explosion.
- Store the battery in a dry, cool, and well-ventilated place, away from direct sunlight.
- For optimal longevity, the battery should be stored in a partial state-of-charge, ideally 40-50% (indicated by 2 LED lights on), at a recommended temperature of 0°C ~25°C.
- If not in regular use, the battery should be charged to approximately 50% SOC at least every 3 months, rather than being fully charged.
- Always use the original mains charger included in the package to charge the battery; using a different charger or improper voltage can damage the battery or cause serious injury.

Warranty Information:

The product comes with a 12-month warranty from the date of purchase, covering defects in material or workmanship. To validate the warranty, customers must retain their warranty card or original sales invoice. If the product becomes defective within the warranty period, the company will repair or replace defective parts free of charge. The complete machine must be delivered prepaid to the company, along with a complete description of the problem, date of purchase, original sales receipt, and contact information. The warranty does not cover normal wear and tear, damage from accidents or unreasonable use, unauthorized repairs, or parts not belonging to the product.