Need help?Do you have a question about the Nu-Way XGN1000-25 and is the answer not in the manual?
Procedures to follow in case of hazardous conditions.
Critical checks like valve closure and pressure switch settings.
Overview of the MBC unit and how to enter the pass code.
Key stages and initial air/gas settings.
Steps for firing the burner and making initial adjustments.
Procedures for setting the air pressure switch and flame signal.
Procedure to set the low gas pressure switch for burner restart.
Verifying covers, locking devices, and appliance controls.
Warning about personnel qualifications and IRD cell testing.
Table listing MBC error codes and their descriptions.
Troubleshooting motor issues and flame establishment failures.
Diagnosing IR detector issues and 6FH servo motor errors.
A form to be completed by the commissioning engineer.
A log for recording burner service and adjustments.
To Next Page
General