Nuga NM-700P - Main Assembly Functions and Controls

How to Take Emergency
Actions during Use
Remove the power cord from
the connected outlet after
use.
1) Press the ‘Low Frequency
Start / Stop’ button to switch
to the low frequency mode.
(Power button color: green
IODVKLQJĺJUHHQOLW
2) Press the low frequency
RXWSXWFRQWUROEXWWRQµŸ¶RU
µź¶WRVHWWKHRXWSXWEHIRUH
use.
Output strength levels: 0-50
step. 4
step. 6
When you are finished, press
the ‘Low Frequency Start /
Stop’ button again to turn off
the Low Frequency mode.
After the set time (30 min.)
the power will turn off
automatically.
step. 5
Note
Stop using the product immediately and
remove the power plug if there is any
lightning.
Stop using the product immediately and
contact your supplier branch or our company
if you smell any burn or detect any smoke
from the product.
Stop using the product immediately and
consult with a doctor if any abnormality
occurs to the human body.
Turn off the power switch immediately, stop
using the product and contact our company
if you find out any failure or power failure
from the product.
Turn off the power switch, remove the power
plug immediately, and then contact our
company if you have poured water into the
product.

NM-700P

P
O
W
E
R
P
O
W
E
R
2
1
i
How to Use the Product