Mounting Bar Edge Rafters (2) Support Arms Small Screws*
Top Trim Center Rafter(s)* Camel Back Wall Brackets Large Screws*
Front Trim Slat Section Assembly Interlock Clips*
Actual Size End Views of Awning parts for easy reference and assembly:
Phillips, Regular & 1/4” Hex Head
Screwdrivers or Drill Bits Power Drill Level Tape Measure
Series 4100 Parts Check List:
Required Tools:
Mounting Bar (A) Top Trim (B) Front Trim (C) Edge Rafter (D) Center Rafter (E)
mounting
bar
(a)
top trim (b)
support arms
slat sections (6-9)
camel back wall
brackets
front trim (c)
edge rafters (2) (d)
center
rafter(s) (e)
slat section seams
*QUANTITIES & SIZE OF PARTS MAY VARY BY AWNING SIZE AND MODEL SERIES
1
2
3
Series 4100 with Support Arms
It is our recommendation that you read instructions carefully prior to assembly and installation.
Series 4100
Aluminum Casement Window Awning
with Support Arms
www.nuimageawnings.com
To Next Page
Need help?
General