MEGAWATT BIKE GUIDE 2022 | 1 1
Fit pedals
All Nukeproof pedals are standard 9/16 x 20BSA threading so are compatible with all modern
cranks.
Tools Required
8mm Hex Key (All pedals) Or 15mm Spanner (Alloy pedals only)
Torque Wrench
Grease
How to determine the difference between the left and right pedal
This step is very important, failure to install the pedals on the correct side of the bike will cause
irreparable damage your crank and pedal.
Alloy pedals
Alloy pedal axles are marked “L” indicating the left pedal (non-driveside) and “R” indicating the
right pedal (drive-side).
Left Pedal Right Pedal
Plastic Pedals
Plastic pedal bodies have an “L” moulded in the body indicating the left pedal (non-driveside) and
“R” moulded indicating the right pedal (driveside).
The axles are also different, the left axle has a ring indented around the lip of the axle whereas
the right does not.
To Next Page
Loading...
