MEGAWATT BIKE GUIDE 2022 | 1 5
Adjust saddle Angle
1. The saddle angle can be adjusted by
loosening and tightening the saddle rail clamp
bolts with a 5mm Allen Key. Saddle angle is
personal preference and subjective to each
rider. Good starting point is to have the saddle
at horizontal and adjust as you spend more
time on your bike
2. To lower the nose of the saddle, loosen the
rear bolt and tighten the front bolt. To raise the
nose of the saddle, loosen the front bolt and
tighten the rear bolt. Please ensure both bolts
are tight once adjustment has been made.
Please ensure the bolts are not loosened
too much as the clamp parts may become
unseated and fall out.
To Next Page
Loading...
