MEGAWATT BIKE GUIDE 2022 | 2 1
17. Pump tyre until it is correctly seated. There is a moulded line in most tyres which must be
visible and uniform the whole way round. the tyre
18. Reinstall valve cap. 19. Lift your wheel and shake it to get the
sealant all round the tyre.
20. Ret your wheel to the bike following the
manufacturer’s instructions.
A couple of points to note:
It can take a couple of rides for the sealant to get fully around the tyre settle. Don’t be alarmed
if you need to top up the air pressure a couple of times between rides. The tyre shouldn’t lose
pressure during your ride.
Some tyres will seep sealant from the sidewalls. This should settle after the tyre has been used
and generally happens on cheaper sealants so we do recommend using a good quality sealant
If you have an air leak at the rim, it will generally appear to happen at the valve but is most
To Next Page
Loading...
