Nukeproof MEGAWATT 297 2021 - SHIMANO STEPS SYSTEM OPERATION; POWERING THE SYSTEM ON AND OFF

MEGAWATT BIKE GUIDE 2022 | 2 5
SECTION 3 - How to use your Shimano STEPS system
This part of the manual details how to operate the Shimano STEPS EP8 system installed to
your Megawatt. The Shimano STEPS EP8 system is user friendly, the following will help you get
familiarised with the controls and display.
How to switch you Megawatt On & Off
This part of the manual details how to operate the Shimano STEPS EP8 system installed to
your Megawatt. The Shimano STEPS EP8 system is user friendly, the following will help you get
familiarised with the controls and display.
1. Locate the power switch on the top tube. 2. Press and hold until Steps logo appears.
3. The bike will power on and show this
screen.
4. Use the handlebar switch to select desired
mode.