MEGAWATT BIKE GUIDE 2022 | 3 1
How to Charge your battery
When charging your battery when the battery is installed to the bike, the display will not turn
on when the battery is fully charged, if not fully charged the screen will turn on briey, load the
Shimano STEPS logo and turn off.
Your Nukeproof Megawatt can be charged in two ways:
• Battery in the bike
• Battery removed from the bike
Charge with the battery in the bike
1. Locate the charging port on the
nondriveside of the seat tube
2. Pull open the cover door and check port is
in good condition
3. Insert your charger into the port 4. Plug the charger into a wall socket and
switch on
To Next Page
Loading...
