MEGAWATT BIKE GUIDE 2022 | 5 8
Cleaning
Cleaning your bike regularly will help maintain its appearance as well as prolonging the life of
wear and tear parts. Allowing dirt to collect on the bike will reduce the life span of components,
increase chances of unnecessary damage and make visual inspection difcult. We recommend
biodegradable cleaning products and do not use a pressure washer. Using a pressurised washer
can cause water ingress, damage components and ush out bearing/pivot grease. Please
lubricate your drive train after cleaning, wiping off any access lubricant. Avoid any lubricants
contaminating brakes pads and rotors. When cleaning the bike, do not remove the battery, this will
protect the connections between the battery and bike.
Service LifE
Your bike is subject to wear and tear, normal for all mechanical components. The service life
is subjective to several factors, materials and design, rider weight, how often the bike is used,
aggressiveness of the riding and terrain, environment and maintenance. Regular cleaning,
maintenance and periodical inspection by mechanics will prolong the service life of your bike and
its installed components.
Spare Parts
All available Megawatt frame spares and Nukeproof components spare parts are available
through any authorised dealer, rst port of call will be your dealer, but any authorised Nukeproof
dealer can assist. 3rd party components and spares can be found through respective dealer
networks and your
> Nukeproof Dealers
> Shimano Dealers
> Shimano Steps
> SRAM/RockShox
To Next Page
Loading...
