MEGAWATT BIKE GUIDE 2022 | 6 0
Section 7 - Specifications/Sizing/Geometry
FRAME SPECIFICATION
The following are available after market frame spares for the Megawatt, if any part you need is
not listed, please consult with an authorised Nukeproof Dealer.
Material Fully Custom Triple Butted and Hydro-Formed 6061-T6 Aluminium Including Forged Parts
Fork Travel 170mm
Axle to Crown 582mm
Fork Offset 44mm
Rear Travel 170mm
Wheel Size 29" Front /27.5" Rear
Max Tyre Size 2.6"
Recommended Shock Sag 30-35% (Measured seated)
Shock Size 230x62.5mm
Shock Hardware F 25x8mm
Shock Hardware R 30x8mm
Sizing S / M / L / XL / XXL
Headtube 56-66mm Tapered Semi Intergrated
Headset
ZS56-28.6 / ZS66/40 (1.5" Tapered) or ZS56-28.6 / ZS66/46 (1.8" Tapered) Requires cable
routing through top cap
Bearings Required 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA
Seatpost 31.6mm
Seat Clamp 34.9mm
Motor System Shimano STEPS EP8, 250W, 85Nm
Rear Hub 148x12mm (Boost)
Rear Axle SRAM UDH Stealth M12x1.0 180mm (Thread length 13mm)
Chain Guide Shimano EM800 drive unit mount
Brake Mount 180mm Direct Post
Protection 3D Contoured Motor Protector and Rubber Frame Protection for DT/SS/CS/Battery Door
recommended sizing
To Next Page
Loading...
