EasyManua.ls Logo

Nukeproof MEGAWATT 297 2021 - SAFETY WARNINGS AND GUIDELINES; BIKE INTEGRITY AND RIDER WEIGHT WARNINGS

Default Icon
78 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MEGAWATT BIKE GUIDE 2022 | 7 0
Section 10 - Warnings
Minimum Seat Post Insertion
The seat post installed to your bike will have a minimum insert line, do not exceed this line.
Exceeding the minimum insert can lead to post and frame damage. If you nd you need the
saddle higher than the insert level allows, please consult with your dealer regarding frame sizing
or a longer post. Damage to a seat post or frame caused by not adhering to the minimum insert
line is not covered by warranty.
Maximum Tyre Width
Do not exceed the fork and frame maximum tyre widths. The frame is designed to accept a tyre
up to 2.6’’ and the forks maximum tyre widths are detailed below. Please note some manufacturer
tyre and rim combinations can be wider when tted together, always check for clearance when
tyres are changed to a different model. Tyre rub can damage frame and will not be covered by
warranty if incorrect tyre size has been used.
Fox 38 29’’ max tyre clearance 2.6’’
Rockshox ZEB max tyre clearance 2.8’’
Maximum Axle to Crown and Travel of fork
The fork length also detailed as axle to crown (A-C) cannot be exceeded. Maximum A-C for the
Megawatt is 596mm. Using a fork that exceeds the A-C may lead to frame failure and injury. Using
a longer axle to crown fork will void warranty. The bike is designed with a 170mm in mind, 180mm
can be used as long as the A-C is not exceeded.
Direct Sunlight and Heat
Try to avoid exposing your bike to direct sunlight and excessive heat, this can damage the paint
and fatigue plastic components.
Rider Weight
Nukeproof bikes are designed and tested to ISO 4210 / EN 15194 standards; our bikes conform
to the load tolerance of 120kg the standards require. If the user is over this weight when kitted,
we would recommend regular inspection and maintenance to avoid issues and expect wear and
tear parts to be replaced more often. 3rd party components may have different load and weight
standards, any concerns with components weight limits please consult with your Nukeproof
Dealer. We cannot guarantee the integrity of the bike and its components if the user is over 120kg.

Related product manuals