12
Safety instructions
The following safety and hazard instructions not only serve to protect
the device, they also prevent personal injury. Please read through the
instructions carefully.
Danger! Risk of electric shock due to high voltage inside the
device
High voltage components are inside the device. Never open the
casing! Components inside the device need no maintenance by
the user. Do not operate the device if the casing is damaged.
Caution!
Please check whether the voltage indicated on the device
matches the ower of your local supply network before you
connect the device. Incompliance with this instruction might
result in damage of the device and injury of the user.
The device does not have its own fuse. Overcurrent protection is provided
by the building’s fuse.
Please disconnect the device from the network if a thunderstorm is
approaching or if you intend to not use it for a longer period of time in
order to avoid electric shocks or a fire.
Nuki Bridge can fail due to technical faults.
You should therefore always make sure your actuators are locked when
using them in combination with a Nuki Bridge.
Improper use of the device might result in damage.
Do not expose the device to extreme heat or cold, direct sunlight, open
flames or other extreme conditions.
Keep the device away from children under 36 months. This
product is not a toy.
Disposal
Do not dispose of the device with the household rubbish!
Electronic devices must be disposed of at local collection stations,
in accordance with the guidelines on used electric and electronic
devices.
EN
To Next Page
Loading...
