NIBBLE 0x3 Assembly Instructions Rev03 10.22.20
1.3 PARTS YOU PROVIDE
• PCB-mount switches (Cherry MX footprint)
• PCB-mount stabilizers
• Keycaps
• BIT-C or other Pro Micro MCU
• [Optional] Qty. 144 Mill-Max 0305 or 7305 hot-swap solder sockets
• [Optional] FR4 switch plate
1.4 ADD-ONS AND EXTRAS
• WS2812B RGB LED underglow
• Rotary encoder & knob
• Big RGB LED & required resistors
• SSD1306 OLED display
• TRRS expansion jack for future numpad support
1.5 TOOLS REQUIRED
• Fine-tip soldering iron & solder
• Needle nose pliers
• Phillips #0 screwdriver
• Snips for cutting leads
• Rubbing alcohol
To Next Page