Num'axes Canicom 200 First - User Manual

User’s guide
« FCC » DECLARATION OF CONFORMITY
FCC rules – part 15
NUM’AXES
declares that
the training collar
CANICOM 200 First
complies to all dispositions of the part 15 of the FCC rules
This device complies with part 15 of the FCC. Operation is subject to the following
conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference that may cause undesired operation.
1/8

Summary

Important Warnings and Precautions

Product Description and Initial Setup

First Use from New

Guides on initial setup, including battery installation and activation of the device.

Fitting the battery in the receiver collar

Step-by-step instructions for inserting the battery into the receiver collar.

Activate;Deactivate the remote control

Activate;Deactivate the receiver collar

Remote Control and Receiver Collar Coding

Coding of the remote control and receiver collar

Explains how to pair the remote control with the receiver collar for the first use or re-coding.

Coding Procedure for the 1 st Use

Detailed steps for initial pairing of the remote and receiver collar.

Re-coding Procedure

Instructions for re-pairing the remote and receiver collar if needed.

How to use the remote control

Operational Guidance and Safety

Checking Functionality

Getting the best results

Fitting the collar

Starting out with the training collar

Cautions for use

Important safety and usage precautions for the collar and remote control.

Maintenance, Troubleshooting, and Specifications

Troubleshooting

Guidance on diagnosing and resolving common issues with the device.

Num'axes Canicom 200 First Specifications

General

Range	200 meters
Receiver Type	Collar
Stimulation Type	Static
Waterproof	Yes
Product Type	Training Collar
Channels	1
Compatibility	1 dog
Transmitter Type	Handheld remote