To Next PageTo Next Page
Need help?Do you have a question about the Numark 5000FX and is the answer not in the manual?
Lists the items included in the product packaging for the mixer.
Step-by-step instructions for connecting and powering on the Numark 5000FX mixer.
Details AC power connection and DJ MIC/MIC 2 inputs.
Explains Line, Phono/Line inputs, and the source selection switch.
Covers Fader Start, Zone, Booth, Record, Digital, and Master outputs.
Explains the Master Gain Reduction attenuator function.
Describes the combo XLR/1/4" input for DJ microphones.
Covers Input Selector, Gain Knob, and PFL meter for channel audio levels.
Explains Treble, Middle, Bass EQ controls and the Channel Fader.
Buttons that route channel audio to effects and sampler processors.
Covers replaceable crossfader, assign switch, and slope control.
Explains Fader-Start buttons and Cue button functionality.
Details headphone mix, volume, tone, jack, and split/blend functions.
Covers Master Gain, Booth/Zone Gains, and Stereo Level Indicator.
Explains Panning and Stereo/Mono toggle for output signals.
Explains the BPM displays and the TAP button for beat synchronization.
Covers Effect Selection, Shift Toggle, LED Indicator, and Wheel usage.
Details CUE FX, SAMPLER FX, RECORD, PLAY SINGLE, and LOOP functions.
Explains the activation and use of the Smart Loop feature.
Details the Scratch, Sonar, BPM 2, and Chop effects.
Explains FX Mix fader, Sampler Crossfader Assign, and Reverse effect.
Details impedance, sensitivity, and max output levels for inputs and outputs.
Provides SNR figures and frequency response ranges for inputs.
Lists channel equalizer ranges, power consumption, and physical dimensions.
Information on sampler length and recommended wheel calibration procedure.
General