To Next PageTo Next Page
Need help?Do you have a question about the Numark CM200USB and is the answer not in the manual?
General| Brand | Numark |
|---|---|
| Model | CM200USB |
| Category | DJ Equipment |
| Language | English |
Input for connecting turntables with sensitive RIAA phono preamplifiers.
Screw connector for securing turntables or devices that need grounding.
Inputs for connecting CD players, tape decks, samplers, or line-level devices.
Terminal for connecting microphones with a 1/4" connector.
Connects mixer to remote start equipped CD players using 1/8" cables.
RCA output for connecting recording devices like tape decks or CD recorders.
RCA output for external monitoring devices like PA systems or monitors.
RCA output for connecting external monitoring devices or home stereo.
Low-impedance XLR connectors controlled by the Master fader.
Connection for the unit's power supply cord.
Sets the mixer to the correct voltage for your location standard.
Turns the mixer on or off after connecting input devices.
Sends and receives audio data from a computer.
Selects the audio signal output through each USB jack.
Includes Power LED, Mic ON/OFF, Mic Gain, Bass, and Treble adjustments.
Covers XLR/1/4" mic input, Channel Gain, Treble, Middle, Bass, and Input Selector.
Includes Channel Fader, Cue Button, Headphone Volume, and Headphone Mix.
Features Replaceable Crossfader, Assign Knob, and Fader Start functionality.
Includes Master Slider, Stereo/Mono toggle, Panning, and Booth/Zone Fader.
Covers Meter Assign and the Stereo Level Indicator for audio monitoring.
Details input impedance and sensitivity for Line, Mic, and Phono inputs.
Provides output power for Headphone and maximum Line output level.
Specifies JIS-A weighted signal to noise ratio for Line, Mic, and Phono.
Lists the frequency response range for Line, Mic, and Phono inputs.
Details the dB range for Bass, Middle, and Treble EQ adjustments.
Specifies the dB range for Bass and Treble EQ for the DJ microphone.
States the typical and maximum power consumption of the mixer.
