Need help?Do you have a question about the Numark M4 and is the answer not in the manual?
General| Frequency range | 20 - 20000 Hz |
|---|---|
| Channels quantity | 3 channels |
| Channel fader (1kHz) | 90 dB |
| Digital sound processing | - bit |
| Number of EQ bands per channel | 3 |
| Line Signal-to-Noise Ratio (SNR) | 100 dB |
| Microphone input impedance | 600 Ω |
| Balanced line output level | 7 V |
| Record out | 1 |
| Line inputs (RCA) | 4 |
| Phono inputs (RCA) | 2 |
Details on connecting power via adapter and the mixer's power switch.
Describes Master and Record output connections for audio systems.
Covers Line/Phono inputs, the Aux Line/Phono switch, and grounding.
Details the 1/4" microphone input for vocal sources.
Adjusts microphone treble, bass, and gain levels.
Covers input selection and channel gain, treble, mid, and bass adjustments.
Explains channel faders, cue mode selection, blend, and cue gain.
Controls master output volume and explains stereo level indicators.
Details crossfader blending, slope adjustment, and mode selection.
Details input impedance, sensitivity, and output voltage levels.
Specifies SNR for different inputs and overall THD.
Defines frequency response ranges and channel equalizer capabilities.
Quantifies channel and crossfader kill effectiveness and crosstalk levels.
To Next Page
