Need help?Do you have a question about the Numark MIX DECK and is the answer not in the manual?
General| USB Playback | Yes |
|---|---|
| Mixer Channels | 3 |
| Effects | Yes |
| Jog Wheels | Yes |
| Media | CD, USB |
| Software Compatibility | Serato DJ Intro (Included) |
| Inputs | RCA, 1/4" Mic |
| Microphone Input | Yes (1/4" TS) |
| Dimensions | 22.5" x 12.5" x 4.5" |
Turns the unit on and off.
Connects the mixer to a power outlet using the adapter.
Connects MIXDECK to a computer via USB for MIDI or soundcard use.
XLR output for PA systems or powered monitors.
RCA output for speaker or amplifier systems.
RCA output for booth monitoring systems.
RCA output for connecting to recording devices.
RCA inputs for connecting audio sources (line or phono).
Selects input level for AUX inputs (line or phono).
Connects turntable grounding wire to prevent hum.
RCA output for connecting to digital DJ software interfaces.
Connects headphones for cueing and mix monitoring.
Connects microphone and adjusts its gain, bass, and treble.
Adjusts crossfader slope and mode for mixing or scratching.
Adjusts output levels for master and booth monitoring.
Adjusts channel gain, bass, mid, and treble frequencies.
Controls individual channel volume and blends between channels.
Selects audio sources and previews tracks in headphones.
Connects and controls iPods for playback and volume.
Monitors the audio level of the program mix.
Ejects CDs and connects USB storage devices for MP3 playback.
Chooses audio source (CD, USB) or USB MIDI mode.
Uses Track Knob and Play button for track selection, playback, and cueing.
Uses the Back button to navigate through folders on a device.
Controls playback, pausing, cue points, and temporary playback.
Handles searching, pitch bending, and scratching audio tracks.
Manages scratch modes, track searching, and start/stop time adjustments.
Adjusts music tempo, pitch range, and enables key lock.
Defines loop points, triggers samples, and controls loop length.
Activates, selects, and adjusts audio effects using the Parameter knob and faders.
Adjusts effect parameters, search speed, and other settings.
Creates track programs and stores/recalls cue points.
Selects playback modes and understands LCD display indicators.
Shows playback status, track numbers, and total tracks.
Displays elapsed/remaining time, BPM, and pitch adjustments.
Indicates MP3 status, key lock, loop status, and text information.
Selects scratch styles (Vinyl, Forward, Bleep) using the Jog Wheel.
Adjusts song key and configures relay mode for unit synchronization.
Configures track search speed and various system/playback options.
Uses trigger buttons for a second set of loop points.
Sets instant playback points (hot cues) on tracks.
Records and plays audio samples with adjustable playback settings.
Defines loop start (LOOP IN) and end (LOOP OUT) points for seamless playback.
Repeats loops or creates stutter effects using the RELOOP/STUTTER button.
Uses the SHIFT switch to adjust loop length by half or double increments.
Details on Filter, Echo, Chop, Pan, Phaser, and Flanger effects.
Adjusts the balance between effected and unaffected audio.
Connects and plays music files from USB mass storage devices.
Navigates folders and selects audio files on a connected USB device.
Connects MIXDECK to a computer for USB MIDI controller functionality.
Installs and configures Traktor Numark Edition software with MIXDECK.
Configures audio output routing for master and monitor channels in Traktor.
To Next Page