Need help?Do you have a question about the Numark DM1090X and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Microphone Inputs | 1 |
| Phono Inputs | 2 |
| Line Inputs | 2 |
| Crossfader | Yes |
| Effects | No |
| USB | No |
| EQ | 3-band EQ |
| Headphone Output | 1 (1/4" jack) |
| Outputs | Master |
Read, retain, and follow all safety and operating instructions for proper use and to prevent hazards.
Guidelines for product servicing, component replacement, and electrical safety checks.
Advice on crossfader care, cleaning, power connections, cable use, repairs, and amplifier operation.
Fields to record model, serial number, and purchase information for warranty purposes.
Details on 6 line, 2 phono, 1 mic inputs, master outputs, and tape out.
Highlights include 5-band EQ, master output meter, and cueing on each channel.
Illustrates how to connect input sources, microphones, headphones, and outputs to the mixer.
Details impedance, sensitivity, output levels, and distortion for various inputs and outputs.
Specifies frequency response ranges, EQ capabilities, power consumption, dimensions, and weight.
Explanation of input faders and toggle switches for source selection.
Details on Mic Gain, Treble, and Bass controls for microphone audio.
Description of the replaceable crossfader for seamless channel segues.
Guide to the 5-band graphic equalizer, including usage hints and EQ curves.
Explanation of Master Fader, Stereo/Mono toggle, and Volume Meter usage.
Details on Channel Cue/Send Assign, Headphone Mix, Level, and Input.
Description of Line Inputs, Phono Inputs, Grounding lug, and Mic Input.
Details on Record Outputs, Main Outputs, IEC Power Connector, and Voltage Selector.
Information on what is covered, for how long, and what is excluded.
Details on repair/replacement process and limitations of liability.
Instructions for obtaining a return authorization and sending equipment for service.
To Next Page
