21
SPECIFICATIONS
MOTOR
TYPE: Heavy duty turntable motor with 12” aluminum platter
WOW/FLUTTER: 0.15% max
SPEEDS: 33, 45 RPM
BRAKE TIME: 0.25 to 8 sec
START TIME: 0.25 to 6 sec
INSTANTANEOUS TORQUE: 4.7 kgf cm
POWER SUPPLY
TYPE: Internal transformer with voltage selector switch, internal switching power supply
CONNECTOR: Standard IEC
VOLTAGE: AC 115V/230V ~ 50-60Hz
CONSUMPTION: 40W
CD PLAYER
TYPE: IDE slot-load, 8X minimum speed
MEDIA: CD, CD-R, CD-RW, MP3 CD
HARD DRIVE
TYPE: 2.5-inch x 9.5mm IDE laptop hard drive, ATA-6, 8192kB data buffer, 4200RPM minimum
MOUNTING: M3 screws
AUDIO
ANALOG OUTPUT: 1.3V RMS+/- 0.2V
HARMONIC DISTORTION: Less than 0.02%
SNR: More than 85dB
SEPARATION: More than 85dB
DYNAMIC RANGE: More than 80dB
OUTPUT LEVEL: 1.3V+/0.2V (1KHz 0dB)
CHANNEL BALANCE: +/-1dB
FREQUENCY RESPONSE: 20-20kHz
DIGITAL OUTPUT: Type 2, form 1, S/PDIF
PHYSICAL
DIMENSIONS: 14.5” by 17.75” by 5.25” (368mm by 450mm by 130mm)
WEIGHT: 22.0 lbs (10kg)
Specifications are subject to change due to ongoing improvements.
User Manual Revision 4.4
To Next Page
Loading...
Need help?
General
