2
User Guide (English)
Introduction
Box Contents
HF Wireless USB Charging Cable
1/8" (3.5mm) Audio Cable User Guide
1/8"-to-1/4" (3.5mm-to-6.35mm) Adapter Safety & Warranty Manual
Support
For the latest information about this product (system requirements, compatibility information,
etc.) and product registration, visit numark.com.
For additional product support, visit numark.com/support.
Quick Start
Important: Charge HF Wireless for at least 6 hours before using it for the first time.
1. Make sure HF Wireless is charged and powered off.
2. Power on your Bluetooth
®
device. Make sure that it's nearby within range and that its
Bluetooth connectivity is on.
3. Press and hold HF Wireless's Function Button for 5 seconds. Its blue and red lights will
flash quickly, and you'll hear a tone.
4. On your Bluetooth device in its Bluetooth settings, select HF Wireless. (If you are
prompted to enter a PIN, enter 0000.) Your Bluetooth device is now paired to HF Wireless!
You can now play audio or make a call.
To power HF Wireless off, press and hold the Function Button for 3 seconds.
See Basic Operation to learn more.
To Next Page
Loading...
General