Fault Finding
Dry Mode maintenance fault nding
If the vacuum cleaner stops working switch o and remove the plug from the wall before
investigating were the fault lies.
If the vacuum cleaner will not pick up any debris from the surface, switch o and remove the plug from the wall,
inspect the oor tool, wands and hose for blockages, if no blockages are found, the dust bag may be full if the dust
bag is not full the lter may be blocked.
Wet Mode maintenance fault nding
If the vacuum cleaner stops working switch o and remove the plug from the wall before investigating were the fault
lies.
If the vacuum cleaner has a blockage and will not pick up liquid, switch o and remove the plug from the wall, has
the oat valve operated, this will shut o the suction and the pitch of the vacuum motor will change
Remove the power head and empty the liquid out of the container, if the container is empty, check that the oor tool
wands and hose are not blocked.
Flush the system with clean water after use.
After use always inspect the machine for damage.
Daily
Keep the machine clean, including hoses and tubes.
Ensure the bag and lter are tted.
Regularly examine the power cord.
Check dust bag frequently.
Check lters are clean.
Weekly - as daily and:-
Check for any worn or damaged parts and replace immediately.
MAINTENANCE
To Next Page
Loading...
