Numatic JVP 180 - Operational Best Practices and Data; Dos and Donts for Usage; Technical Data and Performance Specs

Data
Size Range
180
Motor Airow Suction
800W
500W
30 l/sec 2000mm w.g.
1300mm w.g.
Capacity Size Weight
8L 340x340x340 mm 5.5Kg
Cleaning
Range
Sound Pressure Protection Class
26.8 m 67.1dB(A) - 61.2dB(A)
(IEC 60704-2-1)
Uncertainty 0.2 dB
Class II
● Keep your machine clean.
● Keep lters clean.
● Use lter bags, they will enhance performance and help keep machine clean.
● Use a Numatic Original lter bag under ne dust conditions.
● Keep hoses and tubes clear.
● Replace any worn or damaged parts immediately.
● Regularly examine the power cord. If damage is found such as cracking or ageing the power
cord must be replaced by a qualied person using the correct Numatic original part.
● Change dust bag frequently.
● Keep diffuser lter (where tted) clean.
● Only use the brushes provided with the machine. The use of other brushes may impair safety.
● Unreel the cable with one pull or pull on the cable to unplug the machine from the power supply.
● Use to suck up hot ashes, lighted cigarette ends or ammable gases.
● Use steam cleaners, pressure washers or immerse in water to clean the machine.
● Attempt machine maintenance or cleaning unless the power supply plug has been removed
from the supply outlet.
● Use in a wet environment or to collect wet materials.
● Store your machine in wet conditions.
Regular Maintenance
Keep the machine clean, including hoses and tubes.
Ensure the bag and lter are tted.
Check the dust bag frequently.
Check lters are clean.
Check for worn or damaged parts and replace immediately.
Regularly examine power cord.
Do not steam clean or pressure wash.