This is the biggest practical machine in the wet pick-up range
incorporating a fully integrated submersible pump system allowing for
continuous suction and pump out facilities as demanded by the fire service,
flood damage, flat roofing and salvage contractors.
The Structofoam power head incorporates two Twinflo’ specification
bypass motors; plugged replaceable cable repair system and handle
mounted control centre for both suction and pump operation.
The polyform container is super strong and incorporates the continuous
submersible pumping facility with its own Hi/Lo float operation.
Accessories supplied are to full 38mm (1
1
/
2
”) standard with long hoses,
stainless steel tubes, Structofoam nozzle and a standard 10m (33’)
discharge hose to get all that water away!
BB7
2400W 80 L/sec 2500mm 70L
AP=500W
26.8m 32.4Kg
640 x 530
x 970mm
230V
AC 50/60Hz
Motor Power Airflow Suction Wet Pump Range Weight Size
Twinflo’
Also available 115V/120V specification.
31
To Next Page
Loading...
