Cleaning Sides of pond
13) Remove wet pick up nozzle and extension tubes from hose assembly.
14) Connect slide on brush onto nozzle cleaner to the end of the curved wand section,
or if you are working at a greater depth add 1 or more straight wand sections.
15) Ensure slide valve is fully open on wand section, turn on vacuum and place into
the pond, and scrub pond sides to remove algae and grime.
Things to remember before using the vacuum
• This vacuum is intended only for the use of cleaning/ maintenance of Fish ponds.
• The vacuum must always be secured in place using the 4 x locking castors and on
level ground.
• The vacuum must not be used with extension leads greater than 10 metres.
• The vacuum should not be used for the removal of Hazardous or Volatile
substances.
• Do not allow children near the pond when using the vacuum or let them use the
machine.
• Never
use this machine in or around the pond unless you have a Residual
Current Device Fitted (R.C.D)
• The manufacturer of this appliance cannot accept responsibility for loss of stock
or damage to ponds while using this machine.
12.03.07
To Previous Page
Loading...
Need help?
General
