Numax SPS08 - User Manual

Questions and Answers

S
Sally WalkerJul 29, 2025
Why does the spray pattern of my Numax SPS08 Paint Sprayer look distorted?
- M
  Mike LopezJul 30, 2025
  A distorted spray pattern on your Numax Paint Sprayer can be due to several reasons. It could be that the fluid tip is partly blocked, or the air cap is clogged, so try cleaning the fluid tip and air cap. Another cause could be that the material is too thick or needs straining, so thin the material according to the manufacturer's instructions and strain it using a paint strainer. Also, make sure you are holding the gun parallel to the paint surface. The pattern control knob might be partially closed, so turn it counterclockwise. Finally, the fluid control might be too heavy, so adjust the fluid control knob.
P
Paul MilesAug 5, 2025
What to do if the material sags or runs when using my Numax SPS08?
- J
  James TuckerAug 5, 2025
  If the material sags or runs when using the Numax Paint Sprayer, it could be due to a few reasons. First, the material might be improperly thinned, so ensure you thin the material according to the manufacturer's instructions. Second, you might be moving the gun too slowly; move at a moderate pace, parallel to the surface. Lastly, the gun might be held too close to the work surface; keep the gun 6 to 9 inches from the surface.
J
justinrodriguezAug 13, 2025
Why does my Numax SPS08 Paint Sprayer spray pattern flutter?
- J
  Jacob LoweAug 13, 2025
  A fluttering spray pattern with your Numax Paint Sprayer can occur for a few reasons. Check if the paint cup is loose and tighten it. Also, the material might be too thick or needs straining; thin it according to the manufacturer's instructions and strain it using a paint strainer. Finally, ensure the paint cup isn't empty; if it is, fill it.
S
Scott FranklinAug 21, 2025
How to fix a split spray pattern on my Numax Paint Sprayer?
- L
  lisarodriguezAug 21, 2025
  A split spray pattern on your Numax Paint Sprayer can be caused by a couple of issues. The air pressure might be too high, so adjust it to 40-55 PSI. Alternatively, the pattern control knob might be open too far, so turn it clockwise.

Summary

Symbols and Meanings

Warning Symbol

Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.

Caution Symbol

Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.

General Safety Rules

Instructions Pertaining to Risk

Basic precautions for fire, electric shock, or injury to persons when using tools.

California Proposition 65

Warning regarding exposure to chemicals like lead, known to cause cancer and birth defects.

Product Features

Specifications

Details fluid nozzle size, air inlet pressure, air consumption, and air connector type.

Key Features

Highlights built-in controls, HVLP technology, 125cc cup, stainless steel parts, and included accessories.

Operation

Operating the Spray Gun

Steps for preparing, connecting, and using the spray gun, including trigger function.

Controlling Pattern and Fluid Flow

Guidance on adjusting fluid control, pattern control, and air control knobs for optimal spraying.

Maintenance

Cleaning

Recommended Hookup

Troubleshooting

Spray Pattern Distorted

Addresses issues like blocked tips, clogged caps, material viscosity, and incorrect gun angle.

Spray Pattern Flutters

Covers causes such as loose paint cups, material viscosity, and an empty paint cup.

Spray Pattern Split

Explains solutions for high air pressure and the pattern control knob being open too far.

Numax SPS08 Specifications

General

Brand	Numax
Model	SPS08
Category	Paint Sprayer
Language	English