EN
click
Product Set Up
1 - Align the seat mount with the base mount. Place the seat
directly down until it clicks into place. A “click” sound
means the seat and base are assembled completely.
After assembly, pull up on the seat to ensure it is properly
secured to the base.
Stage One Use
Stage one can be used from birth until your child can sit
upright or can climb out unassisted.
2 - To secure your child, lift the ends of the harness straps
away from the seat cover to unfasten the hook and loop.
3 - Remove the harness straps from the harness loops.
4 - Fold down the crotch support.
5 - Fit the harness snugly to your child by sliding the
harness adjustment buckles, as needed.
Place your child in the seat and reverse these steps to secure
your child in the harness.
Infant Insert
The infant insert can be used for stage one use to provide a
better fit for smaller babies.
6 - To remove the infant insert, unbuckle the harness and
route the harness straps through the infant insert holes.
1 4
52
3
6
12 13LEAF grow instructions LEAF grow instructions
EN
To Next Page
Loading...
