EN
EN
43
PRUU instructions PRUU instructions
Product Information
Model Number: _________________________________________________________________
Manufactured Date: ____________________________________________________________
Warranty
We have purposely designed our high-quality products so that they can grow
with both your child and your family. Because we stand by our product, our
gear is covered by a custom warranty per product, starting from the day
it was purchased. Please have the proof of purchase, model number and
manufactured date available when you contact us.
For warranty information please visit:
www.nunababy.com
Click the “Warranty” link on the homepage.
Contact
For replacement parts, service, or additional warranty questions, please
contact our customer service department.
info@nunababy.com
www.nunababy.com
NUNA International B.V.
Van der Valk Boumanweg 178 C
2352JD Leiderdorp
The Netherlands
1 - This is an "i-Size" Enhanced Child Restraint System. It is approved
according to UN Regulation No.129, for use in, i-Size compatible vehicle
seating positions as indicated by vehicle manufacturers in the vehicle
users’ manual.
2 - If in doubt, consult either the Enhanced Child Restraint System
manufacturer or the retailer.
Child Usage Requirements
This product is suitable for use with children who meet the following
requirements:
Child's
Size
Installation
Mode
Figure for
Installation
Reference
Age
Seat
Position
Infant Insert
Instructions
40cm-105cm/
≤19kg
Rearward
Facing
Mode
<4 years
Position
1-5
We recommend using
the full infant insert
while the baby is under
60cm and ≤13kg.
It can be used
until they outgrow
the insert.
The infant insert
increases side impact
protection.
76cm-105cm/
≤19kg
Forward
Facing
Mode
Position
1 -5
Remove the infant
insert when forward
facing mode.
15 months
to
4 years
Installation
Mode
Installation Swivel Lock
Child's
Age
Rearward
Facing
Mode
Rear/
Forward
Facing
Mode
<15M
>15M
To Next Page
