25
GB
TECHNICAL SPECIFICATIONS
MODEL NPEGG780
GENERATOR
Type Brushless, 2-poles, Single phase
Voltage Regulator Condenser Type
Max. AC Output
0,78 kW
Rated AC Output
0,65 kW
AC Voltage
230V
Frequency 50 Hz
Phase Single phase
Power Factor cos φ = 1,0
Degree of Protection IP23
Performance Class G1
Sound pressure level (measured at 4 m.)*
Sound power level
LP 67.6 dB (A)
LW 91 dB (A)
ENGINE
Model UP65
Type
Air-cooled 2-stroke, Single Cylinder Gasoline Engine
Stroke 45 × 40 mm
Displacement (cc) 63
Max. Output (HP/kW - RPM) 2 / 1.5 - 3000
Fuel Unleaded Gasoline
Fuel/Oil mix ratio 50:1 or 40:1 (Summer)
Fuel tank Capacity (lt) 4.2
Rated Continuous Operation (hs) 6
Lubricating oil Oil for 2-stroke engine
Lubricating oil capacity (lt) - - -
Starting System Recoil Starter
Ignition system C.D.I.
Spark plug type F5TC
DIMENSIONS
Lenght x Width x Height 365 × 310 × 315 mm
Net Weight
17.5 kg
• Specifications subject to change without prior notice.
• Generating set ISO 8528
* Measured according to EN ISO 3744 Standard.
The figures quoted are emission levels and are not necessarily safe working levels. Whilst there is a correlation between the emission
between the emission and exposure levels this cannot be used reliably to determine whether or not further precautions are required.
Factors that influence the actual level of exposure of work-force include the characteristics of the work room, the other sources of noise
etc. i.e. the number of machines and other adjacent processes, and the length of time for which an operator is exposed to the noise. Also
the permissible exposure level can vary from country. This information, however, will enable the user of the machine to make a better
evaluation of the hazard and risk.
To Next Page
Loading...
