What to do if my Nupower NPEGG850 engine won’t start?
If your Nupower Inverter engine won't start, it might be due to a lack of fuel in the combustion chamber, in which case you should supply fuel. Alternatively, there could be foreign matter in the fuel tank, requiring you to clean the tank. A clogged fuel line could also be the culprit, so try cleaning the fuel line.
What to do if my Nupower NPEGG850 Inverter engine runs erratically?
If your Nupower Inverter engine is running erratically, it could be due to a spark plug that is dirty with carbon or wet. Remove the carbon or wipe up the spark plug. If the issue persists and you suspect an improper adjustment of the carburetor, consult a dealer.
How to tighten a loose spark plug on a Nupower NPEGG850 Inverter?
If you find a loose spark plug in your Nupower Inverter, tighten the plug properly.
Covers exhaust fumes, fuel handling, and hot engine safety.
Instructions on avoiding electric shock, including grounding.
Instructions for checking and refilling the engine fuel level.
Guidance on checking and refilling the engine oil level.
Step-by-step guide for starting the generator engine.
Procedures for connecting and using electric appliances.
Instructions for using the generator to charge a 12V battery.
Diagnosing and resolving issues when the engine won't start.
General| Input Voltage | 12V DC |
|---|---|
| Overload Protection | Yes |
| Capacity | 850VA |
| USB Port | Yes |
| Cooling | Fan |
| AC Input Voltage | 220-240V |
| AC Input Frequency | 50/60Hz |
| Output Voltage | 220-240V AC |
| Frequency | 50/60Hz |
To Next Page
