@nursalonline
support@nursal.co
BATTERY INSTALLATION
1. 1.Push and lift out the battery cover as shown in Fig.1.
2. Insert 4 x "AA" batteries in the correct position as shown in Fig.2
3. Replace the battery cover.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
Warning: Danger of explosion if batteries are incorrectly
replaced. Replace only with the same or equivalent type of
battery.
Use only the size and type of battery specified.
Be sure insert the batteries facing the correct polarity as
indicated in the battery compartment. Reversed polarity batteries
may cause damage to the device.
Do not mix different types of batteries together (e.g. Alkaline and
Carbon-zinc) or old batteries with new ones.
If the batteries in the device are completely drained or the device
will not be used for a long period of time, remove the batteries to
prevent damage or injury from possible battery leakage.
Do not try to recharge non-rechargeable batteries; they can
overheat and rupture. (Follow battery manufacturer’s
instructions.)
Do not expose the batteries to excessive heat such as sunshine
or fire.
Remove batteries promptly if drained.
Clean the battery contacts on the device prior to battery
installation.
1.
2.
3.
4.
5.
6.
7.
8.
9.
- 04 -
To Next Page
Loading...