Nurture& The Glider User Manual

Note: Do not allow children to play or use this electronically
operated furniture unsupervised. Due to the risk of injury, make sure
that there is nothing underneath the footrest when it is returned to
the closed position. When not in use, leave the chair in an upright and
closed position. Keep hands and feet clear of mechanism and only the
occupant should operate the mechanism to avoid injury.
Questions? Give us a shout at info@nurtureand.com
CoverBack
Questions? Give us a shout at info@nurtureand.com
INSTRUCTION MANUAL
The Glider
USB Port
Reset Glider to
Starting Position
Adjust Footrest
& Recline Back
Adjust
Headrest

Nurture& The Glider Specifications

General

Brand	Nurture&
Model	The Glider
Category	Indoor Furnishing
Language	English

Summary

Parts List

Assembly Instructions

Attach Back to Seat

Slide the back (part B) onto the seat (part A) by aligning the two brackets.

Secure Back Bracket

Guide the bracket on the back into the sleeve on the chair and press the top of the back down firmly.

Connect Chair Components

Connect the power connectors (part C and D) between the chair back and seat.

Connect Power Cord

Plug in the power cord components (E and F) and connect to the back of the chair.

Usage and Safety

Operating the Glider

Use the buttons to adjust the headrest, recline, and chair position.

Assembly Precautions

Use care when assembling to avoid injury; adult supervision is required.

Weight Limit

Maximum load is 150 kg (330 lbs) to prevent product damage and potential injury.