Need help?Do you have a question about the Nurture& The Crib and is the answer not in the manual?
General| Type | Crib |
|---|---|
| Weight Capacity | 50 lbs |
| Wheels | No |
| Storage | No |
| Finish | Non-toxic paint |
| Convertible | Yes |
| Material | New Zealand Pine Wood |
| Adjustable Mattress Height | Yes, 3 positions |
Attach crib sides (Part C 2x) to crib ends (Part B 2x) using Allen Head Bolt M6*35MM (8x).
Attach crib ends (Part B 2x) to the metal spring support platform (Part C) with Allen Head Bolt M6*15MM (4x).
Follow all instructions, keep instructions for future use, and assemble with assistance.
Keep crib away from heat sources; use specified mattress dimensions and avoid plastic film covers.
Avoid gaps between mattress and crib sides, and do not use soft bedding like pillows or comforters.
Keep strings away from child's neck, tighten all screws and bolts, and avoid placement near window cords.
Adjust mattress to lowest position when child can stand; discontinue use when child can climb out or reaches 35 inches.
Check for damaged hardware, loose joints, missing parts, or sharp edges before and after assembly.
Contact Nurture& for replacement parts or instructional literature; do not substitute parts.
To Next Page
