The ageLOC Boost device is a skincare tool designed to enhance the appearance of skin through microcurrent technology, used in conjunction with the ageLOC Boost Activating Serum. It is intended for daily use as part of a regular skincare routine, specifically after cleansing and toning.
Function Description:
The ageLOC Boost device utilizes a unique microcurrent waveform that works with the ageLOC Boost Activating Serum to deliver ingredients to the skin. The device is designed to provide an instant boost to the skin, promoting a more youthful and radiant appearance. The application process involves a two-minute, half-face application, with one minute per side of the face. The device automatically pauses after one minute, prompting the user to apply additional serum and continue on the other half of the face. After the full two-minute application cycle, the device automatically turns off.
Important Technical Specifications:
- Power Source: The device is powered by a lithium-polymer battery and uses a magnetic charger for inductive charging.
- Charging: Input for the magnetic charger is 5 V, 250 µA, 0.414 Hz. The ageLOC Boost Magnetic Charger has an input of 5 V, 500 mA.
- Environmental Protection: The device is rated IP25, and the magnetic charger is rated IP22.
- Electromagnetic Compatibility: Complies with the requirements of the EMC Directive 2014/30/EU.
- Safety: Complies with the requirements of the Low Voltage Directive 2014/35/EU.
- Weight and Battery Pack: 69.5 g.
- Operating Altitude: The device and magnetic charger are tested at pressures matching 4000 m in altitude.
- Battery Type: Contains a lithium-polymer battery that is not replaceable by the user.
- Charging Indicator: The LED light bar on the device indicates the current battery level during charging.
- Low Battery Indicator: The bottom light on the device turns amber when the battery is low. If the amber light flashes repeatedly when attempting to start an application, it indicates an extremely low battery.
Usage Features:
- Application Time: Each application consists of two one-minute, half-face sessions, totaling two minutes.
- Activation: The device is turned on by swiping a finger up the full length of the touch surface.
- Serum Dispensing: Three pumps of ageLOC Boost Activating Serum are dispensed onto the device's conductive surface for each half of the face.
- Application Technique: Begin application by swiping a finger up the full length of the touch surface. The device gently vibrates, indicating the application is in progress. The serum is applied to the skin using slow movements in an upward and outward motion for one minute per half-face.
- Automatic Pause/Completion: After the first one-minute application, the device pauses automatically, prompting the user to apply more serum and continue on the other half of the face. The device automatically turns off after completing the full two-minute application cycle.
- Pausing Application: To pause the application at any time, swipe down slowly over the full length of the touch surface. Swipe back up to resume.
- Stopping Application Manually: To stop the device at any time, swipe down the full length of the touch surface two times.
- Conductivity Feedback: If microcurrent conductivity is temporarily lost during usage, the device's LED light bar will flash in continuous sets of five short flashes coupled with five sharp vibrations. This indicates a need to apply more ageLOC Boost Activating Serum to the conductive surface and swipe up along the touch surface to resume.
- Unresponsive Device: If the device does not respond to a swipe, it should be fully charged and tried again. If the issue persists, contact Nu Skin Support Services.
- Skin Compatibility: The device is designed for use on healthy skin. It should not be used if the user has open sores or wounds, rosacea, allergies to metal, or if they have problematic or overly sensitive skin. Users who are pregnant, have a pacemaker or similar device, are epileptic, or wear metal braces on their teeth should consult a physician before use.
- User Competence: The device is designed for use by adults. Persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge should only use the device if they have been given supervision or instruction concerning its safe use and understand the hazards involved. Children should not play with the appliance. Cleaning and user maintenance should not be performed by children.
- Application Areas: Do not apply directly to lips, eyes, or eyelids.
- Storage: Do not store near a heat source, such as a radiator, fire, or heat vent.
Maintenance Features:
- Cleaning: The ageLOC Boost device should be cleaned after each use to prevent residue accumulation. Rinse the conductive surface under running water to remove debris and product from crevices. Thoroughly wipe the device dry with a soft washcloth.
- Storage: Store the device in a dry place.
- Damage Prevention: Do not attempt to repair the device yourself. There are no user-serviceable parts. Do not ship damaged devices by air.
- Charger Care: Periodically inspect the magnetic charger for damage. Do not operate the device if it appears to be damaged or broken to avoid injuries.
- Avoid Harsh Chemicals: Do not use harsh chemicals or abrasives on the ageLOC Boost device.
- Temperature Control: Do not leave the ageLOC Boost in an overly hot or cold environment for prolonged periods of time. Store in an indoor environment.
- Placement: Always place the device on a heat-resistant, stable, flat surface, especially when charging.
- Battery Life: Rechargeable batteries, like those of ageLOC Boost, need to carry a minimal charge in order to function properly. For optimal battery life, it is recommended to charge the device every few months to avoid storing it unused for months at a time.
- Charging Compatibility: The device uses inductive charging. Always use the provided charger to charge the device. Do not attempt to charge using any other inductive charger. If damaged, contact Nu Skin Support Services.
- Disposal: Dispose of ageLOC Boost properly according to local laws and regulations. It contains electronic components and a lithium-polymer battery, requiring disposal separate from household waste. Contact your local waste management department for proper disposal and recycling options.
Need help?
General
To Next Page
