Nußbaum Hebetechnik 2.30 SL E

Need help?

Do you have a question about the Nußbaum Hebetechnik 2.30 SL E and is the answer not in the manual?

Summary

Foreword

1. Introduction

2. Master document of the automotive lift

2.1 Manufacturer

Details about the lift manufacturer.

2.2 Application

Specifies the intended use and limitations of the automotive lift.

2.3 Changes at the construction

Procedures for documenting modifications to the lift's design.

2.4 Displacement of the automotive-lift

Instructions for relocating the lift and required documentation.

2.5 CE-Certificate;attestation of conformity

3. Technical Information

3.1 Technical ratings

Lists key technical specifications like lifting capacity, height, and power.

3.2 Safety devices

Details the built-in safety features of the automotive lift.

4. Safety regulations

5. Operating instructions

5.1 Positioning the vehicle

Guides on how to correctly position a vehicle on the lift.

5.2 Synchronism of the automotive lift

Explains the electronic synchronisation system for even lifting.

5.3 Lifting the vehicle

5.4 Lowering the vehicle

5.5 LED - (display visibly) at the operating unit

LED-display at faulty function

6. Maintenance

6.1 Maintenance schedule of the automotive lift

Outlines the recommended schedule for regular lift maintenance.

6.2 Adjust the Polylex-belt

6.3 Check the carrying nut system

6.4 Check of the stability of the automotive lift

7. Troubleshooting

7.1 Emergency lowering in case of power failure

Procedures for safely lowering the lift during a power outage.

7.2 Driving onto an obstacle

Actions to take if the lift encounters an obstruction.

7.3 Function of safety device

Explains how the lift's safety devices operate and what to do if activated.

7.4 Manually equalisation of the carriage

7.5 Adjusting of the top limit switch and the bottom limit switch

8. Installation and Initiation

8.1 Installation of the automotive lift

General guidelines and regulations for installing the automotive lift.

8.1.1 Erection and doweling of the lift

Detailed steps for the physical erection and anchoring of the lift.

8.1.2 Electro mounting and current connection

8.1.3 Installation the carrying arms

8.2 Initiation

8.3 Changing the installation place

9. Security check

Datasheet

Electrical diagram drawing

Record of installation

Record of handing over

First security check before installation

Regular security check

Extraordinary security check