Page 4
MODEL QTXN110HL
OPERATION
Before using heater, make sure heater has been properly
installed according to installation steps under “INSTALLATION”
on page 2.
Use a 4-Function Control to operate the heater, fan, light, and
night light separately. See “Connect Wiring” for details.
NOTE: This unit is designed with a thermostat which senses
excess heat and may start the blower automatically. This is normal
and is no cause for concern.
NOTE: Fan may cycle when light is on. Blinking light may indicate
improper lamp wattage or type.
To Next Page
Loading...
Need help?
General
