NUTOOL nupower EVOLUTION NPEK12 - Page 13

13
GB
function.
Check correct alignment of moving parts, making sure they do
notbind.Checkforanydamagedcomponentsandmakesure
thatthepowertoolhasbeencorrectlyassembled.
Check for any condition that may affect operation of the power
tool.
Unless otherwise indicated in this instructions handbook, a
guard or any other part of the power tool that has been damaged
mustberepairedorreplacedbyanauthorizedservicecenter.
Any switch that does not work correctly must be replaced by an
authorizedservicecenter.
Do not use the power tool if the ON/OFF switch does not turn
thepowertoolONandOFF.
Dustgeneratedwhenmachiningmaterialsisahealthhazard.
Alwayswearasuitabledustmask.
When working, always wear personal protective equipment:
safety goggles, gloves, mask, ear protectors, non-slip safety
shoes.
Never wear loose clothes or jewelry that may be trapped in
movingparts;longhairmustbetiedback.
Alwaysworkonastablebase.
Alwaysfastentheworkpiecesecurelywithaclamp.
Keeptheworkareacleanandtidy.
Alwaysusethepowertoolwithbothhands.
Never open or modify the power tool or its accessories in
anyway.
Do not expose the power tool to rain, or use in damp or wet
locations.Keeptheworkareawelllit.
Do not use power tools in areas where there is a risk of explosion
or fire from combustible materials, flammable liquids, paint,
varnish,petroletc.flammablegasesanddustofanexplosive
nature.
Beware children and pets
Childrenandpetsshouldbekeptoutoftheworkarea.
All power tools should be kept out of the reach of children and,
preferably, stored or locked in a secure cabinet or dry room
whennotinuse.
Use the right tool
Selecttherighttoolforthejob.Donotuseatoolforajobfor
whichitwasnotdesigned.Donotforceasmalltooltodothe
job of a heavy-duty tool. Do not use tools for purposes not
intended.
Do not force the power tool
The power tool will do a better and safer job and give you much
betterserviceifitisusedattherateforwhichitwasdesigned.
Maintain tools with care
Keep cutting tools sharp and clean for better and safer
performance.
Followtheinstructionsforlubricatingandchangingaccessories.
Keephandlesdry,cleanandfreefromoilandgrease.
Ensure that ventilation slots are kept clean and free from dust
atalltimes.Blockedventilationslotscancauseoverheatingand
damagetothemotor.
If this machine is to be used when working at a certain height,
scaffoldingfittedwithrailingandkick-plateoratowerplatform
mustbeusedinordertoguaranteesuitablestability.
GUARD AGAINST ELECTRIC SHOCK
Avoid body contact with earthed or grounded surfaces (e.g.
pipes,radiators,dish-washersandrefrigerators).
Power Cords
Never yank or pull the power cord to disconnect it from the
mainssupplysocket.
Nevercarrythepowertoolbyitspowercord.Keepthepower
cordawayfromheat,oil,solventsandsharpedges.
Check the tool power cord periodically and if damaged have it
replacedbyanauthorizedservicecenter.
Inspectextensioncordsperiodicallyandreplaceifdamaged.
DONOTuse2-coreextension cordsorreels onpowertools
withanearthpath.Alwaysusea3-coreextensioncordorreel
withtheearthcoreconnectedtoearth.
Alwaysunwindanyextensioncordsfully.
Forextensioncordsupto15metres,useawirecrosssection
of1.5mm
2
.
Forextensioncordsover15metres,useawirecrosssection
of2.5mm
2
.
Protect your extension cord from sharp objects, excessive heat
anddamporwetlocations.
This power tool complies with National and International
Standards and safety requirements. Repairs should be
carried only out by qualified persons using original spare
parts. Failure to do so may result in considerable danger
to the use.