Cleaning the NutriBullet Balance
®
Smart Sensor Scale and Well
For the most part the Power Base doesn’t really get dirty, but if you
neglect to twist the Blade onto the Cup tightly, liquids can leak out
and get into the Base and actuator tabs. If this happens please use the
following cleaning instructions.
Step 1: The most important thing is to UNPLUG the Power Base
before cleaning!
Step 2: Make sure the Blade is not attached to the Power Base.
44 | NutriBulletBalance.com
N12S_0901_UG Bluetooth update v5.indd 44 1/10/19 6:44 AM
To Next Page
Loading...
