NUTRIBULLET PRO - Page 6

1110
VENTILATION
To prevent a fire hazard,
the openings on the
bottom of the motor
base should be free of
dust or lint and never
obstructed as they are
provided for ventilation
to ensure reliable motor
operation to prevent
over heating. Never
place your nutribullet
®
on top of flammable
materials such as
newspapers, tablecloths,
napkins, dishtowels,
place mats or other
similar type of materials.
• CAUTION! Always operate
the nutribullet
®
on a
level surface, leaving
unobstructed space
beneath and around the
motor base to permit
proper air circulation.
Slots on the bottom
of the motor base are
provided for ventilation to
ensure reliable operation
and to prevent motor
overheating.
MICROWAVE & STOVE
TOP HEATING SAFETY
• DO NOT BLEND
HOT INGREDIENTS!
After blending room
temperature or cooler
ingredients (21°C/70°F or
less), transfer mixture to
an unsealed, microwave-
safe container or to
a stove-top pot to
heat. Always use a
thermometer to test the
internal temperature of
cooked ingredients, they
may feel cool to the touch,
but still be hot inside.
• Do not place any of
the nutribullet
®
parts in
a microwave, oven or
stove-top pot or immerse
in boiling water as this
may result in damage to
the accessory.
• Avoid blending the
following seeds and pits
in the nutribullet
®
, as they
contain a chemical known
to release cyanide into
the body when ingested:
apple seeds, cherry pits,
plum pits, peach pits, and
apricot pits. Fruit pits may
also cause damage to the
blade and cup.
MEDICAL SAFETY
• The information
contained in this user
guide is not meant to
replace the advice of
your physician. Always
consult your physician
regarding health and
nutrition concerns.
ADDITIONAL
INSTRUCTIONS FOR
PROPER USAGE
• TO AVOID LEAKAGE,
DO NOT OVERFILL
THE CUP! Make sure
ingredients and liquid
do not exceed the MAX
line. The cyclonic action
®
of the nutribullet
®
requires space to
extract eectively and
exceeding the MAX line
can result in leakage and
may create a dangerous
pressurization which
can cause the vessel
and blade assembly to
separate.
• Cup and extractor
blades are specific
to the exact model
of nutribullet
®
. Use of
incompatible parts
(parts from other
models) may result
in damage to your
nutribullet
®
or create
safety hazards. When
replacing cups or an
extractor blade or
ordering additional
accessories from
nutribullet.com, or by
contacting Customer
Service, please specify
the model for parts that
are compatible with
your unit.
• Periodically inspect all
nutribullet
®
components
for damage or wear
that may impair proper
function or present
an electrical hazard.
Make sure that the
power cord and plug
are undamaged.
Discontinue use and
replace blending vessels
if you detect cracking,
cloudiness, or other
damage to the vessel,
tabs on the vessel or
actuator tabs of the
motor base. Ensure that
the blades rotate freely
and that the structure is
undamaged. Make sure
that the motor base is
unobstructed and clean.
Follow maintenance
recommended in pages
WARNING!