The nutribullet® Triple Prep System is a versatile kitchen appliance designed for blending, food processing, and various food preparation tasks. It combines the functionalities of a blender and a food processor into a single system, offering a range of accessories and features to handle diverse culinary needs.
Function Description:
The nutribullet® Triple Prep System serves as a comprehensive food preparation tool, capable of blending, chopping, mixing, mincing, slicing, and shredding. It features a powerful motor base that accommodates different attachments, including blending cups, a blending pitcher, and a food processor work bowl with various blades and discs. The system is designed to simplify meal preparation by providing multiple functions in one unit.
Important Technical Specifications:
- Model: (NBP-200) NBKS07100
- Rating: AC 220-240V 50-60Hz 1500W
- Power: 1500W motor base
- Blending Capacity: 900ml single-serve cup, 700ml single-serve cup, 1.8L blending pitcher
- Food Processing Capacity: 7-cup processing work bowl
- Control Panel: Features OFF/ON, TIMER, MANUAL SPEEDS (Low, Medium, High, Pulse), and preset programs for different functions (e.g., Frozen Drinks, Smoothie, Dressing for single-serve cups; Purée, Frozen Drinks, Smoothie, Nutmilk for blending pitcher; Chop, Dough, Dip for food processing).
- Blades: Extractor blade, integrated blade (for blending pitcher), chopping blade, dough blade, reversible slice/shred disc.
- Lids: Vented lid cap, pitcher lid with spout, 2 to-go lids, work bowl lid with feed chute, dual-size food pusher.
Usage Features:
General Operation:
- Control Panel: The unit illuminates when a blending pitcher, single-serve cup, or processing work bowl is locked in place.
- Timer: Starts at zero (00:00) and increases during operation, showing time elapsed since blending began. Program presets count down during operation until complete.
- Manual Speeds: Continuous Low, Medium, and High speeds for blending or processing.
- Pulse: Used for continuous blending, chopping, and processing. Press and release the Pulse button to chop ingredients; holding down will cause the blade to run continuously.
Single-Serve Cup Blending:
- Ingredients: Place ingredients into the nutribullet® Cup. Do not overfill beyond the MAX line.
- Assembly: Twist the Extractor Blade onto the Cup tightly.
- Operation: Place the assembled cup onto the Motor Base. Select a preset program (Dressing, Frozen Drinks, Smoothie) or use manual speeds.
- Safety: NEVER use nutribullet® Cups to blend hot, warm, or carbonated/effervescent ingredients due to potential pressure buildup and eruption. Do not blend for more than one minute. Do not leave blended foods in a sealed cup. Do not open a sealed cup if it feels hot or warm.
Blending Pitcher Usage:
- Ingredients: Place ingredients into the pitcher. Do not exceed the MAX line.
- Assembly: Place the lid on top of the pitcher and press down to secure it. Twist the lid cap over the opening, press down firmly, and twist until it's locked in place.
- Operation: Place the pitcher onto the unplugged Motor Base. Twist clockwise until it clicks. Plug in the Motor Base. Select a preset program (Purée, Frozen Drinks, Smoothie, Nutmilk) or use manual speeds.
- Adding Ingredients: For the blending pitcher, use the vented pitcher lid and easy-pour spout to add ingredients during blending. Always reinstall the vented lid cap when finished adding ingredients.
- Hot Ingredients: The blending pitcher and vented pitcher lid are designed for blending hot, warm, or carbonated ingredients.
- Tamper: Use the tamper to push ingredients closer to the blade.
Food Processor Usage (Chopping Blade):
- Assembly: Place the Work Bowl on a flat, clean, dry surface. Place the Blade Adapter atop the central shaft and push down to secure. Place the Chopping Blade onto the Blade Adapter shaft.
- Ingredients: Prep ingredients (remove seeds, stems, non-edible pieces), cut large items into 1-2 inch pieces, and add to the Work Bowl. Do not exceed the MAX line.
- Operation: Place the Work Bowl onto the unplugged Motor Base. Twist clockwise until it clicks. Plug in the Motor Base. The control panel will illuminate. Select the High setting for processing.
- Adding Ingredients: Use the Food Pusher to gently guide food down the Feed Chute. Do not overload the Feed Chute.
- Safety: NEVER put hands, fingers, or utensils inside the Feed Chute or Work Bowl. Blades and discs are sharp; handle with care by the center plastic area.
Food Processor Usage (Dough Blade):
- Assembly: Similar to the chopping blade, but place the Dough Blade onto the Blade Adapter shaft.
- Ingredients: Prep ingredients as necessary and add to the Work Bowl.
- Operation: Place the Work Bowl onto the unplugged Motor Base. Twist clockwise until it clicks. Plug in the Motor Base. Select the Pulse setting to integrate wet and dry ingredients before kneading, then select and hold Pulse to mix for a few times until ingredients are evenly distributed. Once dough begins to take shape, switch to the Dough or Low setting. Do not select a higher speed.
- Removal: Twist the Work Bowl counter-clockwise to unlock and remove. Carefully remove the Dough Blade.
Food Processor Usage (Reversible Slice/Shred Disc):
- Assembly: Place the Work Bowl on the Motor Base. Place the Blade Adapter atop the central shaft. Hold the center knob of the Disc and carefully place it on the Blade Adapter, aligning markings for the desired position (lower for storage, higher for use).
- Operation: Place the Work Bowl onto the unplugged Motor Base. Twist clockwise until it clicks. Plug in the Motor Base. Select the High setting.
- Ingredients: Use the Food Pusher to guide ingredients through the feed chute.
- Safety: Blades and discs are sharp; handle with care.
Maintenance Features:
Cleaning:
- Motor Base: Do not immerse in water or other cleaning liquids. Wipe gently with a clean, damp cloth and dry.
- Attachments (Cups, Pitcher, Work Bowl, Lids, Blades, Discs): All components (except the Motor Base, Extractor Blade, and Blade Adapter) are dishwasher-safe.
- Extractor Blade: Rinse under running water to remove debris. If necessary, use a dish brush.
- Blending Pitcher: Fill with warm, soapy water to the MAX line and add 1-2 drops of dish soap. Blend for 20-30 seconds to loosen debris, then scrub away with soap and water.
- Food Processor Components: The Work Bowl and Work Bowl Lid are dishwasher-safe. If preferred, hand wash using warm, soapy water.
- NEVER wash any nutribullet® part or accessory using the sanitize or heat cycle of your dishwasher, as this can warp the part and create hazardous conditions.
Storage:
- Always store nutribullet® upright with nothing on top of it. Store accessories in a safe place until use.
- NEVER leave Blade or Discs exposed when storing. Always cover.
General Care & Safety:
- Always power off and unplug the nutribullet® when not in use or when assembling, disassembling, changing accessories, or cleaning.
- Always wait until the motor comes to a complete stop before handling or removing any attachment.
- Do not place any nutribullet® part, accessory, or attachment in the microwave.
- Ensure Motor Base ventilation openings are unobstructed and clean.
- Periodically inspect components for damage or wear. Discontinue use if cracking, cloudiness, warping, or damage is detected in cups, blending pitcher, or work bowl.
- Discontinue use if the Extractor Blade does not rotate freely or if the gasket is missing or damaged.
- NEVER attempt to use the nutribullet® if it malfunctions or is damaged. Contact customer service immediately.
- It is recommended to replace the Extractor Blade at least every 6 months, depending on use.
- NEVER use after-market replacement parts. Only use genuine nutribullet® attachments/accessories.
Warranty:
The nutribullet® Triple Prep System comes with a one (1) year limited replacement warranty. This warranty covers defects due to faulty material or workmanship. It does not cover damage caused by misuse, abuse, neglect, altered, modified, or repaired by anyone. For warranty claims, contact customer service.
Need help?
General
To Next Page
